Places of use: paddock, stall, roundpen, wash rack Benefits: up to 80% less beding needed, water-permeable, non-slip, minimized injury risk, noise reduction, soft to the joints Price: 42 € per m² Strength: 60 mm Weight: 44 kg Dimensions: 1010 x 1010 mm Material: Polyurethane bound rubber granules Standard Colours: Redbrown or Black-mixcoloured Surface: Flat Underside: „Feet-Structure“, similar to the design of an egg-carton Water-permeable: Yes. Urine and water are able to drain through the hundreds of canals in the mat. Requirements: Bound subground (e.g. asphalt, cement, …), slope of min. 3%, any sort of drainage Cleaning-interval: Depending on the amount of dirt on and especially under the mats, they need to be cleaned in regular intervals (at least twice a year from both sides). Remove all lose dirt under the mats and let a fair amount of water soak through the mats using a garden hose or a high pressure cleaner. Put the cleaner to medium strength only. Allow some hours for drying afterwards. Installation/Assembling: The mats are installed lose in stalls - the weight of the mats and the walls will hold the mats in place. Mats can be cut with a hand held utility knife or better with a fret-saw. Due to the possible change in dimension ( due to change in temperature and humidity) cutting may be necessary after some time. Tolerances and note about material: Tolerances in thickness: +/- 2 mm, Tolerances in measurement: +/- 2 %. Rubber-Tiles expand and shrink with changes in temperature and humidity. When the expanding leads to bending of the tiles they have to be shorted by some cm at 2 sides of the area (see separate installation sheet).